First try with Smokes JD Green NOE 459-300 HPAttachment 285386Attachment 285387
Printable View
First try with Smokes JD Green NOE 459-300 HPAttachment 285386Attachment 285387
Sounds about right. It took 2 tumbles to coat and the first one looked like about 5% coverage. They work pretty good as 9mm blasters but I think I'm going to get another powder from smokes or Eastwood to shake and bake with going forward.
Sent from my TA-1025 using Tapatalk
Just finished up making a “Zombie” PC coat.
https://uploads.tapatalk-cdn.com/202...aafdb8da5e.jpg
Sent from my iPhone using Tapatalk
No new posts in a few weeks? Let's see some more pictures. I will post a few when I get everything set back up
Just finished some powder coating.
https://uploads.tapatalk-cdn.com/202...6813bc238d.jpg
Sent from my iPhone using Tapatalk
A little late to the party but this is my first attempt at powder coating.
These are with Smokes blue powder
Some samples, 450 grain 50 cal eastwood ford blue and the other, 200 gr 45 cal mix of white and blue.
Attachment 290379
Just did a batch of 45 cal for a friend. I don’t own a 45 yet….
https://uploads.tapatalk-cdn.com/202...753599a85a.jpg
Sent from my iPhone using Tapatalk
Here is my work with traffic purple in the 38. Attachment 290392
First time doing 9mm ; Smoke’s Yellow Green ; Lee 356-120-TC
https://i.imgur.com/QkSu5D8.jpg
4:1 gloss clear n black Smokes powder. Shake n bake, stood up in silicone mini ice cubes tray.
Here's some JD Green .45 acp loadedAttachment 290635Attachment 290637
44 Magnum, 240-grain cast shake and bake coated with Smoke's Flame Red
Attachment 290760
I have a few thousand .358 hollow base wad cutters on hand and shoot them in my custom 1911 .38spl. The problem is they lead the throat of the barrel so I decided to clean and PC some to see if it will stop the leading.
Here are before and after coating pictures.Attachment 290835Attachment 290836
Looks like the good old H&G #50. That has long been a family favorite and I can attest to PC makes those work perfectly but I only shoot it in revolvers. Are those the Miha clone with the hollow base option or an original? Curious if the hollow base option might give you better results.
Range ready! Eastwood Ford Light Blue:
https://i.ibb.co/mNr2zD8/01-B16330-F...A47-C174-C.jpg
Those are not the H&G 50. Here is the #50 from a mold that I used to own. Pic 1 is to show the location of the heel relative to the cannelure midway down the typical wadcutter brass (it's the only decent pic I have of the as-cast bullet).
https://i.postimg.cc/9Fmr5V4j/20190121_203539_001.jpg
https://i.postimg.cc/656X4PCF/20190203_145837.jpg
Here's one I recovered from a dirt back stop, .38 148gr swaged HBWCAttachment 291016
Here is a new one for me Kawasaki green with crimson red, it looks camo, this is shake and bake on a NOE 310 nlg 170 FNAttachment 291017