Dear Team,
What size of the APP_Offset_Connector_X do you recommend for 9x19 and 223 rem brass ? Neither caliber brass will pass the APP_Offset_Connector_10.stl.
Best regards
Roger
Printable View
Dear Team,
What size of the APP_Offset_Connector_X do you recommend for 9x19 and 223 rem brass ? Neither caliber brass will pass the APP_Offset_Connector_10.stl.
Best regards
Roger
10mm drop tube, 11mm offset for both.
Dear Team !
Anyone that have been playing with a small camera/screen to monitor the brass/bullet level in the collator ?
Perhaps just using a small Tuya camera and stream to a phone ?
Best Regards
///Roger
Hi,
I use a mirror (actually it's mirror finished acrylic from Amazon). This is how I mounted mine on my Dillon 650XL (not sure why the pics have rotated sideways.) I don't use it so much for checking volume as just monitoring performance and potential jams. Hope this helps.
Ed
Attachment 324685 Attachment 324686 Attachment 324687
Hi. Yep, it's been a while. Doing well and enjoying retirement. Hope all is well with you and yours.
Dear Team !
Is the Rifle_Brass_Collator_Plate_Large.stl the optimal plate for 308 Win brass ?
Best regards
Roger
That appears to be the correct one for the standard body.
Yes and all cases based on it, like .243W, or similar size....for larger, longer calibers, you might use the plate generator...... It's a pretty simple thing to measure the case length, add 3mm and plug in that value where it asks for hole width......and do specify the plate diameter for the size base you have printed (I think that is in the manual), and plate thickness to match the thickest diameter of your case.
Hi Ed! Always great to hear from my first mentor! Retirement still eludes me....even though I have arrived at the pretty much worthless age of 74. ;)
Dear Team!
Any plans on adding a small hole (or similar) in the main body to allow for dumping out sand and other dirt from range brass ?
Best regards
Roger
Attachment 324724
I now realize that collating range brass to an APP to deprime it fast before tumbling, you might get some sand in the mix that will end up in the collator base......so why not use one of these? Then once deprimed it's readly to be wet tumbled if you are as anal as I am. ;)
https://www.amazon.com/BISSELL-AeroS...xoCz08QAvD_BwE
This little jewel isn't that cheap, but I'll bet the Mrs. would love one too.......you could.....share....;)
Someone here recommended this mirror a while back. Clipped on to the brass feeder I can see in both collators, nice for seeing if a plate is jammed when I have music going or running the trimmer on the Dillon with muffs on.
Link