300 rounds of 223 loaded today. Ran out of W748. I really need a quick change kit, im whooped.
Printable View
300 rounds of 223 loaded today. Ran out of W748. I really need a quick change kit, im whooped.
I loaded up a bunch of 223s with jackets yesterday afternoon for a ar . So I got to play with a 550 that a member passed on to me a wile back , I only load 223 on it so it's only used 3-4 times a year .
Saturday morning I found three boxes of 7Mag brass mixed in with small calibers... In the tumbler it went. Later on Sat Night, I pulled it out and sized and primed 60 pieces for later loading!
LOVE finding stuff I previously purchased! Its like its free! :)
CW
↑↑↑ That's what happens when you clean your reloading area :) ↑↑↑
Cleaned my reloading bench and storage. Picked up 1k Winchester small rifle primers to try, 2lbs of W748, and a Dillon Quick Change for the 550. Dug down deep and made the budget stretch without touching "house" money.
Trimmed sized/expanded and primed 20 45-70 cases I shot on Sunday .only got to do some casting now.
Only had time to load up 12 rounds of .44mag. Better than nothing, right?
https://uploads.tapatalk-cdn.com/201...403e2987c0.jpg
AMEN!
Im packed in like a sardine can... I "find" stuff all the time! :)
Yesterday I "found" 5-600 LC 30/06 Brass I knew I had but couldn't find... It was labeled 8MM Mauser with about 100 8MM Mauser that I reformed ON TOP!!!
I tumbled it, but its pretty badly tarnished. Times like this I could use the steel pins. But haven't gone there yet. I de-primed about 200 this AM, annealed them at lunch time.
Tonight I'll finish Uniforming the pockets, deburing the flash holes and form 6.5/06's out of them!
CW
Primed and flared 12 30/30 a.i. cases and when my lubrisizer finally heated up I lubed and sized some 9mm boolits with CR to .357 diameter. Then I got a call from my oldest son saying that his current GF ex husband fell out of a treestand and ended up dead. I suppose Lori & I will go to the viewing tonight.....
Experimenting with .45 ACP loads.
Everything is accurate with the NOE HG-68. Also prepping for some .223 loading.
Sent from my iPhone using Tapatalk
Loaded 20 rounds of 303 savage.
Sent from my SM-G955W using Tapatalk
Finished fifty cases into perfect and completely prepped 6.5/06 Brass
Another 60-70 outside cleaned and annealed. Waiting to be de primed and swadged then uniformed and deburred. Finally re formed/sized Trimmed and primed.
Time for dinner...
CW
loaded up 300 12 ga 1-1/8 oz 7-1/2 shot shells.
After nursing a hurt back for a week I ventured back to the loading room for a little while today. I started resizing a gallon can of 380's. Prolly knock off in a bit and continue tomorrow.
Melted 162# of SOWW and COWW into ingots got about 1500# to go.
I made a pile of 160 gr. 30 cal boolits and another of 120 gr TC 9mm. I also loaded up 4 rounds of 30/30 A.I. w/ 33 gr of Varget and some 160 gr. Lee cast.
Dug up some forgotten .45 230gr XTP hp so I'm stuffing them over Unique in .45 ACP for SD/ hunting loads. I also found a LOT of 230 fmj to load. Come fall I'll cast some 200 swc and 230 tc and resume normal life.
Sized and loaded a bunch of .35 Remington boolits that I had cast last week. Sized and primed a bunch of 44 Mag brass as well. Would have loaded them too, but the powder coat formed a giant boolit glob and they kept jamming up my sizing die. Might just cast some more...darn.