The barrel is .4515 and the ACP cylinder is .450. The bullet is .452
Why does Ruger cut the cylinders so tight? Is it sloppy quality work or is it just for jacketed ammo?
Printable View
The barrel is .4515 and the ACP cylinder is .450. The bullet is .452
Why does Ruger cut the cylinders so tight? Is it sloppy quality work or is it just for jacketed ammo?
I don't own a revolver yet so can't really say what is causing the leading. If you ask your question here you will better answers. http://castboolits.gunloads.com/forumdisplay.php?8-Cast-Boolit s
Thank you Robert for getting my registration complete. I've been in the chat room for a few days and unable to post to the site, but Robert has all that fixed now. Been lurking for a short time and decided to jump in with both feet. Been busy reading the "stickies" and have a Lee IV-20 pot arriving soon as well as a .45acp mold 220g SWC.
I'm still going to need a lube/sizer I guess and Lord knows what else. All the guys in chat have been most helpful. Anyhow: Hello!
"I'm just a 12 year old cleverly disguised as a responsible adult"
Another lurker here. Started off reloading, decided to take the next step and move into casting. Put a few basic items on my christmas wish list (Lyman Cast Bullet Handbook, Lee 20 lb pot, Lee 2 cavity mold, lyman ingot mold and a few other bits) . Read the chapters in the Lyman book, read a piece from this site called "From Ingot to Target" and watched a fair number of youtube videos too.
Quite a lot of stuff to learn. But then I then just decided the best thing to do is just give it a go.
Picked up some ready to cast lead alloy from my local reloading store, cleaned, lubed and smoked the mold, melted some lead, fluxed it and had a go at casting. A little tricky at first as its not easy to see the spout on the lee pot without stooping, but it got better. Made about 160 bullets. Had intended it to just be an exercise and was just going to melt them at the end but they look pretty good.
Not sure if mold temp was too low/high. Bullets seemed to be nicely formed, pretty shiny with no frost or wrinkles. sprue took about 10 seconds to get fully frosted.
When I put the rest of the lead into ingots, the first set were shiny, the rest were frosted.
From what I understand, thats a sign of too hot a mold with an alloy that contains antimony. not really an issue with an ingot.
The reason for the long winded preamble above is that my bullets were not frosted. The Lee mold instructions seem to indicate that a bit of frost is desirable. Not sure if that is because of their tumble lube, if it is because their aluminum molds are known to get pretty hot or something else. Other things i read indicate that you dont want frosted.
From the sprue times I dont think my molds were cold, but then I dont have a baseline. So do I want frosty or not frosty? The bullets I cast are pretty shiny
Well, I'm done lurkin. I joined up yesterday. Just getting into casting myself. I'm waiting on a thermometer that I ordered Sat. then I'm off. I must say..I've read a wealth of info over the last month on here and I want to thank you all for that and letting me join. This is only my 3rd post but why aren't they showing up in my post count?
Woops,.there's one now. Maybe posts in the test section don't count.
New to these forums.
http://s10.postimg.org/8nm1lbafp/4brooms.jpg
Got Mausers to feed. :veryconfu
Cheers.
I am sorry for lurking but I have a disease that is dangerous. It is called GAS, I am sure you have heard of it. It can lead a person to lurk around the fringes of many different web sights having to do with guns and reloading. GAS, or Gun Acquisition Syndrome is easy to catch and hard to overcome. I found that because of this GAS, reloading was my only option due to the amount of lead I was consuming. Great to be a member of this elite group.
Welcome to the site.
gmsharps
Hi all - new (former) lurker.
I'm truly amazed at the vast amount of great information on this site. I can and spend countless hours ready the posts. Maybe one day I'll have something worth posting.
John
Hello, just signed up. Used to reload and cast bullets years ago. Just getting back into both.
I joined some time back but this is my first post. I'm casting with a Lee 356-120 TC mold for 9mm, using the Lee .356 sizing die and tumble lubing with LLA and liquid JW. The second batch of boolits turned out great (the first batch got re-melted), and shot great out of a Kahr CW9 and a Ruger SR9. I want to thank everyone here for all the fantastic information. I know my success so far is only due to what I have learned from the people on this site. Again, thank you and as I keep going i will share what I learn along the way.
After being away from shooting, reloading and casting for nearly 20 years, I'm getting back into it. Shot a lot of lead back in the 80's in IHMSA (handgun silhouette) and CBA. These days my main interest is IDPA shooting and I'm working through 3k or so of cast .45s of various weights. I recently hooked up with an old casting buddy to talk about loading a heavy bullet 9mm.
Joe Fleming
Here's some.
Attachment 132346
.308 Win. 160 gr. sized .308. Haven't had a chance to shoot them yet, too cold. Tomorrow maybe. These were cast by a friend since I don't have any casting/sizeing tools yet. My "M" die came today however.
Loaded over 10 grns of Unique.
I started looking into reloading about 2 years ago. At that time I began reading books and online articles about the benefits and to gain general knowledge. I then began researching equipment to purchase and in doing that I found this site about a year ago. I actually joined at that time, and this is my first post, because I was so impressed with the knowledge of all of the members and the brotherhood that there is on this site. I was immediately impressed with the generosity of so many of the fellow members to newbies or veterans alike. I have read countless threads about what products people use and like the best and I have spent the last year trying to acquire what I wanted on a budget. As soon as I can find some large pistol primers I'm finally ready to get started reloading and I'm looking forward to casting my own bullets in the future.
Now I can officially say I'm not a lurker anymore.
Greetings all, been lurking for a couple of months now and learning a lot from the forum. As you already now, there is a lot of experience here and it is great to see how people are always willing to help others out. I hope to keep reading and learning and eventually give back to the community. Thanks to all in advance for your help!
I've been interested in casting for awhile now,this site has helped me gain the knowledge to try to do it, Just gathering all the stuff up now.
Thank you for all information you share.