Modified Lee TL314-90-SWC. Powder by the pound Traffic Orange
Attachment 250361
Printable View
Modified Lee TL314-90-SWC. Powder by the pound Traffic Orange
Attachment 250361
OK...so I have been finishing the painting job on the Pantry that I've been working on for what seems like forever. I got the Backdoor painted yesterday but the two window lights at the top had plastic trimwork (paintable) held in by 8 gold colored screws. I didn't want to paint the screw heads so I broke out the PC setup and PC'd them white with Smokes Traffic White.
Not boolits....but just another use for a great PC setup.
redhawk
Attachment 250564Attachment 250563Attachment 250562
Powdercoated a few really heavy 44 Mag projectiles for a forum member.
Left: Accurate Molds 41-400P - Lead with a bit of Tin - Smokes Blue - Swaged into BT Sniper HP Point Form Die (OAL 1.14 X DIA .430 - 415gr)
Middle: Accurate Molds 43-400P - Lead w/a bit of Tin - Smokes Blue - Cast, Coated & Sized (OAL 1.11 X .431 - 415gr)
Right: Accurate Molds 43-500P - Lead w/a bit of Tin - Smokes John Deere Green - Cast, Coated & Sized (OAL 1.34 X .431 - 505gr)
Attachment 250899
Picture of the 41-400P before and after being swaged in BT Sniper's 44Mag Hollowpoint Point Form Die.
Attachment 250900
Lee 356-125-2R and 358-105-SWC done with powder by the pound turquoise blue.
Attachment 251211
Lyman 358430 in the 200gr. version...the 'Super Police Load from Yesteryear' ... slow little freight trains that the Police used to call "Pelvis Breakers"
Like I said "Slow", @ 772 fps they didn't 'explode' the jugs but they plowed right on through and penetrated all 5 milk jugs of water...that surprised me!
SAECO 158 gr SWC.
Smoke4320 powder. White Aluminum (Silver) and a bit of traffic yellow.
In real life more a yellow tone than the green on the picture.
Attachment 251870
deer turds!
Nut Brown
https://i.imgur.com/VSDjW1f.jpg
Attachment 252531Attachment 252532Attachment 252534
Lyman 323470, Coated in a mix of Blue & Silver.
Trying gc first coat second.
CW
Did some PCing today. I have bowels of powder with BB's already to go, picked a reliable one because of the high humidity 94% and rain. Warmed my boolits before dumping in the bowel started shaking an swirling gave it 30 seconds took a look it was a no go. Recently I bought some Poly Beads at the craft shop ( heard about this here on CB ) Switched out the BB's to the poly beads and here is how they turned out.
https://i.imgur.com/MbMXrY6.jpg
https://i.imgur.com/wimwR75.jpg
https://i.imgur.com/Eqk1neZ.jpg
https://i.imgur.com/oJ3Yu21.jpg
I knew you'd 'Spill the beads' Joe!
https://i.imgur.com/3azaNlC.jpg
no BB's or beads shake-dump-bake. This is one of my best Powders
.225 pearlescent steel grey - 55 grn
https://i.imgur.com/XItTOtq.jpg
+ GC https://i.imgur.com/KaLkkZA.jpg
Sorry Charlie :bigsmyl2:
Some LEE 358-158 Purple/White
Attachment 252687
CW