Wanted to watch the video, couldn't hack the bongo's being louder than the dialogue,,,,,,
Is there any possibility of reloading the video without the background muzak?
Printable View
Wanted to watch the video, couldn't hack the bongo's being louder than the dialogue,,,,,,
Is there any possibility of reloading the video without the background muzak?
I just turn the sound down a bit.
Waco. Just because you have a low es does not make it a accurate load.
I have some wolf 223 ammo that has shown a 5fps spread. But you put it on paper and it is a 3 moa load. You just need to find the load that has a low es and is accurate at the same time.
Your shooting two different groups MAY be from the load, but it may be you as well. I have found that when I shoot 2 groups it is USUALLY me. It came down to parallax and head position on the stock not consistent from shot to shot. Just some more to think about.
Keep up the good work! Hey that rpmt will be at 180-200K soon!:drinks:;-);-)
Concur. It's during the flight of the bullet to target that the centrifugal force acts on the imbalances in the bullet which results in larger groups or poorer accuracy. However the 3 moa accuracy tomme boy was getting is within the expected criteria for the Russian bullet. Pretty much the same with our own milsurp bullets. They are not the best or most precisely balanced bullets thus they will not be as accurate as quality commercial bullets are even if the internal ballistic measurements such as the ES and SD prove better.
15lbs. coww
6 1/2lbs Lino
1/2 pound 63/37 Sn, Pb
NOE XCB water dropped.
I'll get back to you in a month....:shock:
Vz , Larry, run. Exactly what I was say but you guys said it way better.
I bet if Waco can get all the parallax out of his scope and can load the gun without taking his head off the sock he might get rid of the 2 groups.
Time to sort, cull, and hurry up and wait.....Attachment 214529
So I got all of the boolit sorted by weight. They were all culled between 162-163gr.
I sorted the out in.01gr lots.
Time to let them age. Attachment 214709
Nice job OP , I too plan to tackle 600 yds with the LEE 312-185 mould that I plan on doing some high velocity mid range testing with in both my 308 and my Mosin 91/30.
Waco
Regards weight sorting the 30 XCB bullet (NOE) for accuracy. You might read; http://goodsteelforum.com/forums/top...rove-accuracy/