I don't have the 311008. My guess is accuracy will go south before leading occurs, but that is bore, alloy, mold, sizing, and lube dependent. If you get leading, try doing the trick of putting a coat of LLA over top of the conventional lube.
Printable View
I don't have the 311008. My guess is accuracy will go south before leading occurs, but that is bore, alloy, mold, sizing, and lube dependent. If you get leading, try doing the trick of putting a coat of LLA over top of the conventional lube.
Thought I'd try some Green Dot loads. 8.5 grains yielded 1578 fps with the 115 grain Lyman 311008. 9 grains gave me 1632 fps, and 9.5 grains bumped it up to 1690 fps. This was at 32 degrees F. Just ran a patch through the bore with some Shooter's Choice and I don't see any lead in there.
How was accuracy?
I do have a good heavy load worked up with the Lyman 311041, but I've been thinking the last couple of days. I honestly don't feel I need to push the 311008 so fast. 7 grains of Red Dot gives me 1400 or so fps and this load flies flat to 100 yards. It should be plenty potent enough to kill varmints and turkeys. I think I'll stick with it for a while and try it out on some critters. If I need more ooomph than that I'll use the 311041's.
It's been a while, so I thought I'd give an update. I tried the 311008 out on some groundhogs and performance was great, with complete penetration and instant death. In the end however, I got tired of re-zeroing my rifle every time I wanted to use different bullets. I decided to stick with one load in the 30-30, namely the 311041 at 2150 fps. See here... http://castboolits.gunloads.com/show...30-on-last-day
For the 22 Hornet I was able to acquire a 5 cavity NOE 225107 mold. It's a 37 grain plain based flat point that looks really nice, but I haven't started load development yet. Originally I was thinking of loading it to around 1400-1500 fps for use on groundhogs around the farm. Then my hog hunting buddy in South Carolina said if I powdercoated it I could shoot it as fast as j-words. That would be awesome, but I have no experience powder coating bullets. Heck, even if I could achieve hunting accuracy at 22 magnum velocity levels with water-quenched COWW's that would be pretty darn useful. So does anybody have experience doing this with a Hornet? Any tips or advice would be much appreciated!
Attachment 278466
This is a 165 grain lead flat point boolit from Hunter Supply, with 5.5 grains of Red Dot. A little heavy for squirrels, perhaps, but minute of head for sure. About 1080 fps.
ETA: The rifle is an old Marlin lever action.
Maybe a Lyman 311041 w/o the gascheck?
https://i.imgur.com/0LR49yA.jpg
Its not surprising that your 311008 worked on groundhogs at ~13-1400 fps, that is basically a .32-20 equivalent load.
Myself, for the .30-30 I started with about four grains of Green Dot under most any .32 cal handgun boolit from 95-120 grains. It did what I wanted it to so I never really did much experimenting or more load development.
Robert
Got some of the 225107's powdercoated and shot them through the Hornet today. 4.9 grains of Herco gave 2150 fps and half inch groups at 50 yards despite breezy conditions. Only fired 15 shots but didn't get any leading and cleanup was easy. Three patches and I was done. I think I'm ready for groundhogs!
Dont shoot any tree rats with the 2150 fs loads, you will wind up with two-piece tree rats. Ask me how I know..... NOE makes a 46gr WFN that makes a dandy small game load with 3.0 gr of red dot.
I nailed a crow the other day with the 22 mag equivalent load. A center chest hit killed it without a twitch and didn't tear it up much. Just a hole all the way through. Had a chance at a g-hog on Saturday. 100 yard shot in a pretty stiff breeze. Only came close enough to spook him down his hole. :(
I have a NOE 225-46-WFN that I got for my CZ 527 .22 Hornet with a 1:16 twist barrel that shoots Sierra Hornet .223 bullets more accurately than the same bullet in .224 diameter. I tried to load with Trail Boss to get into rimfire standard velocity range, but accuracy just wasn't there. I had plans to hollow point with Forster hollow point add on to my case trimmer but never got to it. Tried them in my .222 Howa mini action HB 1:14 twist with better accuracy to 50 yds with Red Dot. Still working on it but I am currently starved for 22 caliber gas checks!
One comment is that this WFN will not feed from the magazine of either my CZ or Howa so you should be prepared to single feed this boolit!
Shot into water jugs at 25 yards with the 22 mag equivalent load. Bullet stopped in the third jug and expanded to .348 diameter.
https://www.tdpri.com/media/22-mag-bullet.46585/full
Impressive!
Three44s
Just picked up a Savage 340 in Hornet I have a NOE 22 caliber that throws a 39 gr GC I've used in my Winchester 43 should do fine!
Attachment 281857
In one ear and out the other.