I guess you slice with prusaslicer (or Superslicer)?
I loaded the stl and i see the same in PS, but after i sliced it and check preview it seems like it is ok.
Printable View
Just a little 9mm Production
Attachment 296882
I use Simplify3D, I haven't printed the wheel yet but I noticed that was the only plate that had something like that on it.
Even in Cura the same ridge is displayed, it looks like those two pieces are not touching the build plate compared to the rest of the wheel.
Attachment 296883
Just had this discussion on discord. It is a zero width artifact that openscad wants to insert when rendering to an stl file. It does not show up in the preview, and there is no reason for it to be there. Based on how the code is written, you would think it would be in all the slots or none at all. Since it is 0 width, any decent slicer will not render it, so it is really a non issue. Anyone who cares to spend time looking at the code is more then welcome, but since it doesn't affect the print anyway its not on my list of things to do.
It will show up in the Prepare tab in Cura, but it should not show up in the Preview tab once you slice it.
I am getting ready to print another one for my Lee APP press. I want to do this one in Dillon blue. Someone here had mentioned a good brand and color of filament that closely matched the Dillon Blue. Does anybody remember the details?
Ok, eating crow.....there is ONE. I went back and looked carefully, revolving the .stl file's "Z". It took the revolving to find it tucked in one corner of one of the 10 case cutouts. Indeed it is one layer thick and thankfully did not actually physically print on the "small case plate" 300 version. So yeah...it does show up on the slicer picture I use too. (IdeaMaker) But I didn't see it when I sliced, being only one case slot toward the back. Good thing it would have driven me crazy...;)
I just got a new APP press and I printed the "App_Bracket_main" and I found that it wasn't tall enough to ensure that cases fed through it. The top would get hung up on the "Brass_insert" for each one. So, I had to increase the scale for the bracket main by 5% vertically and it worked. Not sure if Lee made a slight modification to the size of the press.
It is necessary to have one of the nuts between the bracket and the press. That sets the height correctly.
Attachment 296964
Thanks! I thought about using a spacer, didn't realize that I should have just added the nut. I looked through the User Manual but didn't see it mentioned.
Appreciate it!
Don't have a clue how you ended up with that artifact. Mine printed fine.
https://i.postimg.cc/xjNBdPBF/IMG-3864.jpg
I have used Esun, See my pic above....
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
GWS, when did you print that?