^MJS, those look good! I organized some brass that needs to be cleaned up.
Printable View
^MJS, those look good! I organized some brass that needs to be cleaned up.
Resized and wet tumbled about 1,100 pieces of 45ACP brass yesterday.
Was trimming/reaming cases with my Forster case trimmer and finally had enough of the skinny .216" handle on the collet closer and replaced it with a piece of 5/8" aluminum. Drilled a .228" hole though the 4.5" piece of aluminum then milled a 5/8" (couldn't find a 9/16" endmill) recess for the collet closer body. Deburred it, tapped out the skinny handle, slipped on the aluminum cover and then tapped back on the skinny handle to hold it on. Works great and much easier on your hands if you're trimming/reaming a bunch of cases.
general cleanup and putting stuff where it needs to be
Pharted around and loaded about 50 more 9 mm rounds.
No time this past weekend, Son got hitched on Saturday, broke down the tents on Sunday and am now dog sitting at his place while the new married couple is do the honeymoon thing. Man life is so good!!!
Absolutely nothing.
Hopefully sort the last bucket of wheelweights. 19 down, 1 to go! :drinks: Prolly going to buy more in a few days, oh boy!
Scored another 30lbs of roofing lead. Hoping to get one more good ingot party before Winter takes over. Gonna swing by later this week and see if they have any more.
Kraken Fan #69
Mounted my new to me RL550B. Straighten up the bench a bit getting ready to set up for 44 Mag.
Attachment 207063Attachment 207064
It looks good sitting there!
I wish my bench & loading area was that neat.
Looks great!
:)
Tell me about it!
reloaded 25 brass shotgun shells with APP
bit bullet and when on and ordered the RCBS 12 gauge die set as several have been stepped on an otherwise are no longer round
Half emptied my Lee pot, turning the molten material into boolits for my 9mm. Since I started sizing both the 9mm and .357 to .358 it makes life a bit easier.......
Wu Hu, Finally finished sorting 20 buckets of wheelweights! Just in time to go buy some more.
Started to get my Loadmaster changed over to do 9mm. Then I have a lot of 38 spl to do too.