I wanted to play with the model to check operation, so I modeled everything. I'll probably do some new prints at some point as well (no promises though)
There were a few changes I made so far, most based on posts from other users.
- Added second set of holes 4" down to the toggle links for a shorter ram to top plate distance
- Moved the cross brace for the link arms down 1"
- Lengthened the arm to 27" to clear the top of the press
- Added set screw holes to the toggle arms for holding dowel pins in
- Added flats to the arm where the set screw holds it at the toggle bar
- Changed from a threaded end on the arm to a tapped hole and 1.5" set screw
The file is an e-Drawing (think PDF for CAD models)
e-drawings viewer download
This allows viewing of the 3D assembly, rotation, measurement, STL file export, show/hide, 3 configurations 3", 3" with short links, 6" strokes. The 6" stroke has an animation.
Attachment 63351