5 Attachment(s)
new questions and new pics.
I received the original type safety from DG this morning. I put the bolt back together watching two different youtube videos. Something isn't right. DG, you mentioned that I might have to shave some off of the front of the cocking piece. By my measurements I will have to shave 1/8 inch. That can't be right, can it? Here are some more pics with a tape measure so that you can see the measurements. Do all of these look like the right size pieces?
The first pic shows how far the cocking pieces recesses into the shroud
Attachment 279436
The second pic shows how about much I will have to bevel. See the mark at 5 1/8. I marked this with the bolt in and the gun cocked.
Attachment 279435
The third pic shows how far the cocking piece extends when cocked.
Attachment 279437
The fourth pic shows the length of the shroud. It almost seems like my shroud is too long.
Attachment 279438
The fifth pic shows the length of the new firing pin.
Attachment 279439