Plane yellow wood glue works good also
Printable View
Plane yellow wood glue works good also
Not everyone has a drill press. For those of us that don't. Dimple the steel with a center punch and apply high temp automotive RTV glue.
Winelover
overseas we used to secure loose knife/machete handles by stuffing the hole in the handle full of plastic bag pieces, heating up the handle, and pressing it into the hole. the plastic would melt then become solid.
Nice job.
I tried doing the same thing, but the metal is kind of hard.
I ended up using epoxy and it's been working fine so far.
Really didn't think it would hold up to the heat, but so far, it's holding.
That sounds like a very effective method. I’m going to try that!