If it were me >>>> http://castboolits.gunloads.com/show...r-50-Razorback
Printable View
If it were me >>>> http://castboolits.gunloads.com/show...r-50-Razorback
actualy most opinions that mirror yours come from the history of the h&h. Its about forever been downloaded to near 06 ballistics. It can actually be handloaded in a modern gun to sneak past the 300 win mag and leave the 06 and even the improved 06 in its dust. 300 win mag power in the smoothest chambering round ive ever used. Hard to beat that.
.450 marlin,
and i dont recall seeing .375 ruger or 416 ruger on the list
Actually they come from the fact that H&H has too much taper & when blown out the cases have significantly more powder capacity, therefore more speed & power than the H&H can achieve.
That's why the Wby was made and all the others that came from that case.
Whatever gain a "modern" powder can do for the H&H it can also do for the others.
Pacifc Tool & Gauge made the reamers; they had a special going on, order a chamber reamer and get a size die reamer and die blank for only $79. It took several months to get them. I made seating dies using the chamber reamer and size die with the size die reamer. I used some old Pacifc Durachrome dies for the die bodies. Also have a Hornady custom die set; these were single pointed as my pilot on my reamer was too large for their die blank.
Great, thanks!