i am a member there don't go there much a lot of mall ninjas and experts like him.
Printable View
i am a member there don't go there much a lot of mall ninjas and experts like him.
Some people's experiences vary................some who just don't get it vary more than others. :roll:
Sheesh! I had to force myself to finish that thread! Ya just want to look him up and smack the back of his head to get his attention! 40 years of loading eperience? Sounds more like 4 days!
Ya can't cure stooopid!
After reading the entire thread, it is apparent the OP hasn't a clue nor does he want to admit that he MAY have caused the problem! Case in point...the following is a quote from him:
You belief is incorrect; a factory crimp die has no resemblance at all with a sizing die; particularly in 9 MM. 9 MM is a tapered shell so the sizing die contacts the entire surface of the shell to reshape the taper not jsut a carbide collar; that's why lubing 9's is valuable because without lube there is so much pressure on the brass that it accelerates the creation of the bulge at the base of the shell, the lube minimizes that. A factory crimp die has an adjustable collar that extends a taper crimp and forms the cartridge down further where the bullet base is in the shell. I'd take one apart and photograph one but mine are all set and don't want to have to reset them.
Obviously he is NOT thinking about what has been said to him. I would think that a light might go off in his head that removing the said "bulge" in the case would be in fact swaging the boolit down. It seems to me that this is a classic case of "throwing pears before swine" because he has no interest in learning from others or listening to the well intentioned comments. His mind is set and NOTHING will change it.
Edd
I'd have to agree with the vendor, tell the OP to take his business elsewhere. He's an idiot.
Unfortunatley there is no helping him, because he doesn't want to be helped.
My favorite myth is the one about not being able to shoot cast in a rifle faster than 1200fps with out leading.
I offered a fellow to let him shoot my 35 whelen with my cast boolits and then check for leading.
The deal was he would have to shoot the WHOLE box of 50 rounds and THEN check. Well 180gr going 2400fps in a 6pound gun gives quite a kick, so I'd be sure the impression left on him would be multifold when the test was done. Still waiting for him to do the shooting part. :)
There are lots of folks out there that elected a false promise in 2008. Many still think they did the right thing, and will do it again in 2012. It's like not seeing the forrest because the trees are in the way.
This loader simply refuses, to see his mistake, because he wont accept the responsibility, for what he did.
I wanna know how he got all the leading out of his barrel.
NOBODY TELL HIM THE EASY WAY TO DO IT! :)
He probably bought a new barrel- his was obviously ruined. Maybe The bullet company will get sued for the cost of the barrel?
I suggest the OP go back to using jacketed bullets.
I got this.
Ah yes, the instant expert. My favorite kind.
This is the kind of guy who gives cast a bad name. I have run into his type on occasion, I tend to ignore them. They are best left to marinate in their own stupidity.
I feel stupider after reading all that. I am now afraid to go cast and reload.
It doesn't matter if its 4 or 40 years, If you don't fix your mistakes and do things correctly you are still wrong.
I'm still finding things I've been doing wrong or the hard way. Easy is better.
I would like to thank the members here that have posted on that thread, for not directing him here!
Ignorance is curable, stupidity is terminal.
Jim
If the joker does show up and carries on here like he does there, he won't last long....