2 Attachment(s)
Here's a pick of the development loads.
Quote:
Originally Posted by
577450
I might be missing something. I asked what kind of accuracy and the closest answer was "pretty good" . Is the object high velocity or'extreme accuracy'? I'm probably just a dumb redneck- or bubba- if you prefer, but would 1 minute, 3 minutes , or 100 minutes be too hard to say? I don't know what a Saubier is so that didn't help. John
These tests are trying to determine bullet stability in the high speed twist 14 caliber barrels (1 in 7 twist). The accuracy will need tweeked in after I find the speed range of the bullets. As I run up the ladder test these loads showed "pretty good" results in that speed range. As the bullets top over the 5000 fps range I will start tweaking in the load for better accuracy. These bullets are actually for the 1 in 9 twist barrels which should show better accuracy when the RPM level is back in the sweet spot.
This testing is more for finding when the jackets start to fail.
They should look better without the bore cleaning round fired in the groups as well when testing is over.
Attachment 311152
Attachment 311151