CrispexX
You have a PM.
Printable View
I think I got this idea from someone here?? Used some brass from my scrap box to make this for 358s:
http://img.photobucket.com/albums/v1...psb7ce1019.jpg
http://img.photobucket.com/albums/v1...pscf1dc7d3.jpg
Bump.
I recentlystarted casting for my Mosin Nagant. I used a fire steel case and drilled a hole through the head and use a 1/4' bolt as a pusher.
Never thoughtof the sand paper on the outside.
On the 357 and 44 I shoot as cast, tumble lubed.
When I started with the Nagant I thought I'd try conventional lubes and a Lee .314 push through sizer. I have the sizes for a few other calibers. I haven't used the pistol ones yet and haven't started casting 7 mm yet.
If I get good results with the Nagant then I might try the 7mm's.
When I do I'll make kake cutters for them the same way.
Leo
Thanks to Ben for the OP and Minerat for the bump. This looks like something even I might be able to cobble together.
Most calibers available on E-bay. $15 to $20
I use the old Lyman "Kake Cutter"s or the old Lee pan Lube/sizer kit.