boots all the time, gloves no. Yes I get a few splatter burns nothing that won't heal in a few weeks ..
gloves are very near by in case things get hairy
Printable View
boots all the time, gloves no. Yes I get a few splatter burns nothing that won't heal in a few weeks ..
gloves are very near by in case things get hairy
Hhhhhhmmmmmm !
Took a small burn Monday on the right hand. Part of a sprue entered the cuff of my glove. Thankfully a small part.
If I undertook this adventure as a young and dumb man I may have done some of the dumb things I've seen recounted in this thread. However I started in my late fourties as I am now 51 so have learned a few things along the way. Covered head to toe in safety gear. Ball cap wrap around safety glasses with p95 titty mask welders coveralls as well as gauntlet gloves and steel toe boots. I've never had the tinsel fairy meet me yet nor had any serious burns visit my exposed flesh. I want to continue to enjoy our hobby and not recuperate from it.
I always wear flexable leather gloves......not welder golves! They are soft deerskin and protect from a moderate amount of heat and definitely "splashy" burns. Yet you still have the tactile feel you need to do stuff.
Also wear a full face shield, safety glasses/side shields (sometimes forget to flip the face shield down! Olde Tymer's Disease) and a leather shop apron for neck to toe protection, especially when smelting. You cannot beat leather!
A friend of mine had an ingot mold spill down his leg (blue jeans, thank goodness) and a bit ran into his tennis shoe. He never casts without cowboy boots on now!
Safety first. Suite up and have many safe casting sessions!
bangerjim :guntootsmiley:
My welders coveralls have lead splatters on them which is a reminder to me that those coveralls are protecting me from the burns I could get if I didn't wear them especially the ones in my crotch area!!!
Gloves and long pants. I only wore shorts once:D
Anytime I start feeling invincible I just look at the tattoo on my L forearm, the missing piece reminds me to wear PPE. Many years ago while casting grids at a battery plant, a glob of hot lead decided to land on my arm. Remembering the pain while running to a sink motivates the heck outta me.
Leather gloves, glasses. When smelting I start a pot and put a splatter shield over it in case of an explosion. When casting I know the lead is dry so no worries but till gloves and glasses..
All the safety equipment. This was July in Texas. I'd rather smelt & cast when it's cold. But as I said, it's Texas. ;)
http://farm3.staticflickr.com/2877/9...a1f36e91f2.jpg
july-2012 079 by ZombieApoc, on Flickr
also I dress that way to melt the bullets, but in summer it is too hot ...... I though that work I do at night.
anche io mi vesto in quel modo per fondere i proiettili , ma in estate è troppo caldo ...... anche se io quel lavoro lo faccio di notte .
Gloves for me! I'm a welder and I can attest to the speed with which stuff can go wrong. There is a universal problem in which familiarity breeds contempt, and that is the fight to fight. Lightweight TIG gloves are a great compromise, as they are flexible, allow good tactile sensation, and are heavy enough to protect the hands. Maybe not as good as heavier gloves for ultimate protection, but certainly great over nothing. Just MHO...
About 5 weeks ago I suffered a COOKING ACCIDENT, and had 2nd degree burns to my shooting
hand Index Finger, Thumb, Wrist and Forearm areas.
The Burn Center cut all the blisters and dead skin off with scissors, cleaned and bandaged me up.
All this was not FUN for sure, but I'm healing up well, THANK GOD.
Accidents and DUMB things DO OCCUR, in the Kitchen or Casting Lead.
When I'm at the casting bench, I'm fully COTTON and Leather clothed and use Welder's Gloves and Apron,
Safety Glasses and Face Shield, Hat, all the safety goodies for sure.
If you think safety equipment is uncomfortable, try a trip to the BURN CENTER.
Safety First and GOOD CASTING GENTS, Ladies too.
God bless! Glad to hear you are on the mend. Amazing how fast our lives can be changed through normal daily activities.
Moonman's statement about wearing cotton clothing is very important. Cotton will not melt to the skin, causing horrific pain when it is peeled off of the burn underneath.
Being a welder I am very aware of how fast we can get hurt messing with hot stuff. We are all wise to wear at least the basic safety equipment when smelting and casting. I like the idea of wearing the face shield. I wear safety glasses when working with lead, but not a face shield. Now that I have admitted to that, the handwriting is on the wall. I certainly have one hanging on the wall of my shop...
Thank you for the post.
Bob
+1, the only third degree I have was with a torch in one hand & a lead in the other.Quote:
Being a welder I am very aware of how fast we can get hurt messing with hot stuff.
Worst burn I ever got was when I was learning electronics. I dropped the soldering iron and instinct said catch it so I did. 5 seconds later I dropped it again as the pain registered, I had caught it by the tip. Since then drop it and I push back away and let it fall :oops: