Larry -"266455 most accurate through 2000fps"
Quote:
Larry Gibson
Quote:
Originally Posted by swheeler View Post
"IMR 4895 start- 23gr. Max is 31gr @2105fps 18" bbl .No filler needed." by 243wxbr
Try that load in Swede and report back how it groups, get a big target.
swheeler is quite correct; going well past the RPM threshold will eat that load's accuracy alive, been there, done that, several times and so have a great many others.
Larry Gibson
Larry Gibson[/QUOTE] But in your article you say this about the 266455.:confused:
Quote:
My experience with numerous of them has narrowed my choice down to 266455 which is a Lyman Lovern design with no bore riding nose. That 266455 design fits the case neck and throat of all 4 of my 6.5 Swedes perfectly and with no bore riding nose to contend with it has proven to be the most accurate design for the 6.5 Swede up through 2000 fps. Cast of most alloys it runs from 125 -130 gr in weight with GC and lube. It has provided me with the best accuracy across a broad spectrum of velocity in the fast twist Swede. Many find good accuracy with the other designs but most often it is in or below the RPM threshold. The Lyman Lovern design gives the best accuracy at higher velocities from the 6.5 Swede and also the same basic design gives the best accuracy in other calibers as well.
[smilie=l: http://www.castpics.net/