Found a resizer. Still need the expander.
Looking for a .30/06 neck resizer die for the 310 tool as well as a .311 expander to fill out a .30/06 set.
I have the following 310 adapters for trade: #2,#1,#6-2each, and a #5. PM me./beagle
Printable View
Found a resizer. Still need the expander.
Looking for a .30/06 neck resizer die for the 310 tool as well as a .311 expander to fill out a .30/06 set.
I have the following 310 adapters for trade: #2,#1,#6-2each, and a #5. PM me./beagle
I'm cleaning up and getting rid of some dupes and excess.
I have a few deals pending, until they're completed, I'm pausing the availability of these to figure everything out. If I'm already talking to you, the pause doesn't effect our deal(s).
.38/357 set complete (with steel handles, other sets do NOT include handles unless noted)
.38/357 set, complete
.357 bullet sizing die and pushrod
.300 H&H partial set
.222 set missing priming chamber, otherwise complete
.222 set with modified priming chamber (works, but has home-made primer ram)
.270 partial set
.270 complete boxed set for new line jr
.300 savage, partial set
.308 partial set
(Set aside to work something out with brass magnet).43 Spanish, complete set, Also have a matching mold...
45/70 complete set + .457 "Kake Kutter" and .457 sizing die and pushrod
8 die adapter rings (allowing 310 dies to be used in standard presses)
Various single dies, and some more sets that I'll add tonight or in the next few days.
I may be talked out of most of a set for .32 S&W long for the right trade, but it'll need to be something pretty special...
Things I'm looking for:
Odd or unique caliber 310 or other reloading dies (must be something I want and don't have already)
Lead (hard is okay, soft is better)
Rare/Uncommon molds (especially looking for obsolete designs that I don't already have, and 2-4-6+ cavity molds of various makes)
Star/magma style sizing dies in .224 .363 .364 .365 .502 .503 .504 .540 .541
I frame or J-frame S&W project gun(s)
(based on that list, if you have something else you think I might like, feel free to ask!)
I think I have what you are looking for. If one is a die with 123 on it with 328 on the stem cap is the resizer and the expander with
123 on it with 311 on the cap. If this is what you need, let me know and P.M. me your address.... Bobby
Sorry the above reply was for beagle....
I have the following two 310 dies to trade:
Lyman 30/06 DA, seating stem 366, no locking ring. Actually, the A (DA) stamped on this looks like an upside down V so I may have this wrong...
Lyman 30/06 CMR, neck expander button is .308, includes new decapping pin and the locking ring.
I’ll be trying to assemble a 30/30 set, looking to start with the neck sizing or seating and crimping dies, but any considered.
Jim
Hi
I am looking for a set to reload the old 32 S&W (not 32 S&W long)
I have a set of I think 38 special or (more likely) 357 I can trade in addition to other considerations
I have nothing for you but would think the same set would do both 32 S&W & Long.
From what I understand they made a set specifically for the 32 S&W but if the long set would work i will take it
Jaxenro, did you get what you need? Are you interested in a Ideal No. 1 for .32 S&W? It doesn't have the dipper or decapping pin, and the box was in really bad shape so I glued/taped on paperboard where it was missing and it is at least functional.
~WH~
I bought a set of steel handles marked 3006 awhile back to put in with my 7mm Mauser dies. That may I wouldn't have to swap back and forth handles from another set.
I got it out the other day to play with.
I noticed the hole where you put the cartridge case in the handles was a bit large.
I measured it with my calipers and got about .565 diameter. I think this set of handles was reamed out for something like a 348 Winchester.
Anybody willing to trade a steel set of handles marked with 7x57 or 280 Remington? Even a 30-06 set will be fine.
Leo
I have two steel handle boxed sets for trade. One is in .222 Rem and the other is in 8.6 x 56. No, I don't know what cartridge that is.
Both sets are in VG shape however, the 8.6 has no decapping unit. It could have been lost over the decades, or if it were for a Berdan primed cartridge it wasn't used. A different decapping system would be required. The .222 set has found a new home now.
I'm looking for similar boxed sets in .32/20 and .38/56, and steel handles marked for .303 British and .38/55, as well as a .45/70 primimg chamber.
Thanks for the look.
https://i.imgur.com/QJQXK53.jpg?1
Pl. remove. duplicate.
Congrats on Retirement Brass!
Congrats Brass...You will enjoy it.....Bobby
There are two of the early Ideal 32 S&W hand tools with the mould on the end and the integral seating die (not threaded!) on FleaBay. I am not bidding and I don’t know the seller. Search “Ideal Reloading” to find them.
Recently picked up a set of steel Ideal handles, a bit of plumb coloring left, if that matters, with a # 11 on them.
Also have a 222 Remington seater, and sizer/decap die, an 8mm muzzle sizer without plug,
308/311 bullet sizers with 1 ram, 357 bullet sizer with ram.
3006 size/decap die, short decap pin but stem is intact.
Looking for serviceable set of small handles, #1 adapter (357 mag), #3 priming (357 mag) SPC exp chamber.
Set of 44 mag dies>
Serviceable large handles, 30-30 dies
Picked up a set of Nickle steel handles marked 30-06. Marked Ideal, Middlefield Conn. USA. No threads in the adaptor hole. Would like to trade for a set of handles that my new Lyman 310 45-70 dies will fit in to.