6.5x55mm Swedish Mauser-Whats the big deal?
CAUTION: The following post may include loading data beyond currently published maximums for this cartridge. USE AT YOUR OWN RISK. Neither the writer, The castboolits.gunloads, nor the staff of assume any liability for any damage or injury resulting from use of this information. 38 year old Lyman data-129gr cast w/gas check bullet #266455 #2 alloy. IMR 4895 start- 23gr. Max is 31gr @2105fps 18" bbl .No filler needed. Redding http://www.redding-reloading.com/ makes custom BR bushing dies/seaters. Lyman "M" die. Need brass, plenty here. http://www.midwayusa.com/viewProduct...ber=1390109581 Making brass out of 30-06 to make tight necks? Not for the average guy, as neck turning might be needed. PLUS Huntington http://www.huntingtons.com/dies_caseform.html tells you NOT to do it.
Quote:
The base diameter of this caliber(6.5mmx55) is much larger than the .30-06 or similar cases and therefore cannot be safely used for forming. Norma cases or ammunition in the respective caliber is recommend.
As far as killing water jugs or 1gal paint cans, did that with a 1903 Springfield (new GI Bbl.), cast bullets, flip up GI sights @300 yds. IMR 4895. And no i dont load the 6.5mm [smilie=l: