Originally Posted by
Sur-shot
Thought I had replied to this thread, but I do not see the new shop / reloading room. This is a specifically designed 1800 sq ft, foam insulated, heated and cooled shop building with a 20x25 reloading room. The window is barred and looks down a 250 yard rifle range. The bench on the upper left is the shot shell reloading bench, it has a 410 and 28ga reloader on it now. This is a retirement project.
The cabinets are unfinished Oak, with sander sealer, the bench top is made of a double 2x12 with a 1x2, wood glued between, all setup in pipe clamps. Then a 2x8 was glued and screwed to the back to for a strong back and back splash. The 2x8 was then screwed to the wall with 3.5 inch deck screws, every 16 inches into a stud.
I thought about this setup for a long time. One interior wall is the concrete wall of the 16x10x10 vault.
Ed