I have a ten bore double barrel Paradox Rifle. My former boolit supplier died, and his widow sold all of his stuff.
Any suggestions on a source for a quality mould? 20:1 alloy, boolit diameter is .7934" or so. About an ounce.
thanks,
Rich
Printable View
I have a ten bore double barrel Paradox Rifle. My former boolit supplier died, and his widow sold all of his stuff.
Any suggestions on a source for a quality mould? 20:1 alloy, boolit diameter is .7934" or so. About an ounce.
thanks,
Rich
You're looking for a Special BP mould/guy with ball for 78-84 cal .
Goodsteel did some work with a cyl bore 10 ga .
For whatever it's worth a .690 in pure is right at 1-1/4 oz .
Not too big for these guys:
https://www.ballmoulds.com/?fbclid=I...OAR7Ar_sxbbIpk
I'm not sure what you mean by about an ounce. A .800" ball would weight about 800 grains. This mold from Accurate is about 990 grains.
https://www.accuratemolds.com/bullet...bullet=79-990P
Cast bullet Engineering here in Australia!
https://www.castbulletengineering.co...moulds/10-bore
A 10 Bore Parradox?!? We NEED Pics!
Yes, Good Steel got a round ball mold for his 24" barreled 10 ga double that I gave to him. I think he got the mold from some place in the UK.
I queried the net and found a Ten bore is 0.775 inches
These folks make round ball molds
Discussed back in 2015 https://castboolits.gunloads.com/sho...0Ga-slug-loads