anyone else think Super Blackhawks aren't great
was cleaning our 2006 super blackhawk 44mag and got reminded how many things are finicky with it. the loading gate likes to close leaning slightly and catches a ledge not fully seating and sometimes pops back out to that spot when shooting. the hammer pull makes the transfer bar run into the bottom of the firing pin so you almost have to point the gun in the air to cock it so gravity hold the transfer bar away from the firing pin. the trigger dont reset until you take pressure off the hammer since its holding the transfer bar which needs to move for the trigger reset. ive had to shim the mainspring and keep it clean and oiled to reliably set off rounds, bit of dust on the hammer and it falls too soft.
really wouldn't trust it to save me if a bear wanted to eat me. my SRH is great function wise ive never doubted one of its functions. but SBH im confused how everyone has high opinions of them cause most of these seem like design problems.