Powder charges for 38 spc loads
Hi all,
Going to load a few 38 spc for snake rounds.
I've cut several shot cards out of heavy business cards and have some shot (unsure what size...looks to be #8? It was found at the local metal recycling place inside weighted bags...bought it for scrap price of lead)
Plan to put in powder charge, two cards shot almost to top, another card...roll crimp slightly and titebond III glue
I have Tite wad, unique, hp38/231
Certain one of those powders (or all three) will work fine but not sure what is a good starting charge weight.
Snakes in Louisiana are a plenty and would like a few of these on hand to dispatch with a snubnie (also have a 4" model 10 but that may impart too much spin on the shot to make it worth while)
May find some leading in the barrel, that would be ok if I need to use em I'm happy to scrub the bore...not planning on blasting these all the time just when needed
Thoughts on charge weights or something I should consider before moving ahead?
Sent from my Moto G Play using Tapatalk