Offered locally. All the boxes hold molds too. What might be a good starting point for negotiating a bulk price? Seller says not sure if pots work
Printable View
Offered locally. All the boxes hold molds too. What might be a good starting point for negotiating a bulk price? Seller says not sure if pots work
Lee molds $10 bucks, Lyman molds $45 bucks - each. Dead led pots free. Working $25 bucks. Other stuff, $20 bucks.
That's half a pick-up of money. You need to get them way down on the molds, I counted 25.
Looks like there is a Mec shotshell press in the back, too.
I'd offer $150.00 and go to $200.00 tops!
I agree, $150 and I would want to look at the good molds. If their is a lot of ball molds I wouldn't go over $150.
Mostly Lee molds and single cavity other molds. Condition unknown. Major gamble if you can't personally inspect. The rest depends on how badly you want it. I would say $200 is generous on the basis of the picture alone.
I'd also go $200-$250 depending on the molds. If some ball in there then I'd drop the price. I didn't see anything that couldn't be cleaned and fixed. Are those lead ingots under the bottom left of the mold pile?
Yeah, one to 2 hunnerd.
Maybe offer to swap something you have, that you don't need?
It’s easily over $250 if the molds are in good shape. The handles add $25 each and there are quite a few.
I already have everything I need, so I would ask myself how much use I would get out of all this. I think my top would be seventy five, and even that might be pushing it.
Throw in $5.00 for the flip flops.
Hey Cheeto303, I'm just down the street from you.
Now for the other side of the coin... If it was yours how much would you sell it for? ;)