Would anyone be willing to show pictures of the lube pressure screw? I need to see how the screw goes over the threaded stud for the spring assembly.
Printable View
Would anyone be willing to show pictures of the lube pressure screw? I need to see how the screw goes over the threaded stud for the spring assembly.
Check your IM. Send me your email and I can send you any pictures you need.
The pressure screw just sits on top of the spring assembly you showed in a picture in your other thread. There is a bored recess in the end of the pressure screw which surrounds the short threaded upper end of the spring assembly. It is not attached to the spring assembly. The upper end of the pressure screw is bored & threaded internally and is cross bored & threaded to accommodate the handle to turn the pressure screw. To remove the spring assembly you remove the pressure screw and threaded cap from the reservoir tube, remove the handle and invert the pressure screw. The internal threads in the handle end of the pressure screw mate with the threaded stub on top of the spring and the screw then becomes a handle for pulling the spring from the reservoir tube. There is a video on the Magma site showing that procedure. Something like "How to add lube to the reservoir".