Remington Creedmoor Rolling Block Rifle

Printable View

11-13-2021, 01:34 AM
marlinman93

Remington Creedmoor Rolling Block Rifle

I finally made some time to get the stocks on my Remington Creedmoor rifle more finished, so they look more correct to what Remington finish was, and not the flat, plain, light color someone re-did on my rifle. I stripped the surface, and applied a reddish hue stain to the stock and forearm, and after a few coats I applied some Wipe On Poly. Only took a few coats as the stock grain was very closed grain and took it quickly. Let it dry for a couple weeks, and then rubbed it out with rottenstone, and then finished with Minnwax paste wax, and buffed the stocks out.

Before:

https://i.imgur.com/GSMVBfYl.jpg?1

After:

https://i.imgur.com/CzPo3Dhl.jpg

https://i.imgur.com/cPikKgKl.jpg

https://i.imgur.com/8m2nrcql.jpg
11-13-2021, 05:33 AM
RustyReel

Wow, what a difference! I like reddish stocks as well, what stain did you use. If I remember correctly you mix colors.
11-13-2021, 06:51 AM
smithnframe

Looks good!
11-13-2021, 01:42 PM
marlinman93

Quote:

Originally Posted by RustyReel

Wow, what a difference! I like reddish stocks as well, what stain did you use. If I remember correctly you mix colors.

I used Minn Wax stain in a dark mahogany color. I buy red dye from Tap Plastics that's designed to mix into oil base stain, and I simply add a few drops to a small container I put stain in. Then I test the color inside the barrel channel of the forearm until I like the color. Don't want to just spread it on without a test first, as no telling what it looks like when it's in a cup and looks very dark brown.
11-13-2021, 04:54 PM
tctender

Looks very nice.
11-13-2021, 04:59 PM
Slugster

Very nice!
11-13-2021, 05:03 PM
BigAlofPa.

Agreed it looks great. Nice to see a vintage rifle back to it's glory.
11-13-2021, 05:44 PM
RustyReel

Thanks for the info marlinman. I've combined their Special Walnut and Sedona Red stains but have never been really happy with it. But I only use one coat of stain, maybe I need to add a couple more. I have a bland Pedersoli RB that could use a stock refinish and maybe I'll try again with a few more coats before giving up.

I considered the mahogany color before buying the Special Walnut, but heck Gunstocks are supposed to be Walnut right?? Thanks again for the info, always enjoy reading your threads.
11-13-2021, 06:19 PM
marlinman93

Quote:

Originally Posted by RustyReel

Thanks for the info marlinman. I've combined their Special Walnut and Sedona Red stains but have never been really happy with it. But I only use one coat of stain, maybe I need to add a couple more. I have a bland Pedersoli RB that could use a stock refinish and maybe I'll try again with a few more coats before giving up.

I considered the mahogany color before buying the Special Walnut, but heck Gunstocks are supposed to be Walnut right?? Thanks again for the info, always enjoy reading your threads.

You're welcome!
I sometimes use more than one coat of stain, but rarely. It just doesn't seem to change much with more coats, and often it affects the drying time of the finish later if it's too built up with stain. I make sure to not leave a lot of excess stain on the surface also. I let it sit a few minutes, and then I rub it dry to eliminate any wet spots. I also wait a couple days after staining to make sure the stain is dried well before applying finish.