Anybody using VihtaVuori N140 in their old military rifles? What calibers? Tell me more....
Printable View
Anybody using VihtaVuori N140 in their old military rifles? What calibers? Tell me more....
...reduced load and cast bullet as per R.Lee handloading manual_ K98k, 8x57IS_
https//www.handloadermagazine.com/m1-garand-handloads
This is a detailed article that does not include any info on cast boolits for the Garand (only J-words). It also discusses N150 in the Garand & in the end didn't recommend it. The author thought the burn rate was too slow. They admitted that it performed OK, but felt op rod damage was a threat with N150.
Hope this helps. I have a good supply of the VV powders & like you want to use them in my Garands & 03-A3 rifles.
Henry
I've used N140 and N135 in 8x57, 7.5 Swiss, 303 Enfield, 7,62 X 53R, 30-06, 308, 7.63x53, and 7x57, using data from the Hornady Manual and VV website data.
N135 and N140 are my go to for the condom covered projectiles.
It's consistent, but a bit on the fast side for cartridges like 7.5 Swiss and 7x57.
I haven't used it with cast and have no data for it.
There is M1 Garand data for N135 and N140 in the Hornady reloading manuals #10 and #11.
May give you an idea where to start. N135 is very close to H4895 and N140 is very close to Varget or Re15.