Educate me on the .310 BSA cadet I just purchased, bullets, brass, dies etc.
Ok I purchased a good specimen with great blue and near perfect bore. I have not measured anything, just got home with it. I did notice the # 32 stamped on top of the reciever by the barrel. For a stock gun, what is the usual bore, land/grooves, what can I make brass out of and what bullet diameter/weight do I need, assuming it is stock. like I said the bluing and bore is great, the wood has no cracks or breaks, but has lived a rough life, and the buttplate is shiny bare metal with no bluing on it.w I know a lot of these were rechambered for 32/20 when leaving down under. All feedback appreciated.