Reloading UKInline FabricationADvertise hereRotoMetals2
Titan ReloadingRepackboxMidSouth Shooters SupplyLee Precision

Donate Now Goal amount for this year: 6000 USD, Received: 1970 USD (33%)
Our Annual server fund drive is going on now! This donation drive helps fund Cast Boolits for an entire year, and helps support our 2nd amendment rights! You can donate by Paypal by clicking the DONATE button. Or by Cash / Check / MO to the address below:

Willy Snyder
PO Box 2732
Pocatello, ID 83206
****Due to overwhelming e-mails, I will be very slow in updating this list. Please bear with me!****

Loads for good old lead

    If you have any loads you've cooked up for cast boolits for your 303 you can share them here.
    Supersonic, subsonic, heavy, or light.
  2. 9.3X62AL
    Nothing exotic or esoteric here, but it works well and shoots accurately in my SMLE No. 1 Mk III. I have a wide-grooved and much-fired example that requires .316" sizing on a semi-custom Lee 200 grain boolit from a Group Buy done here about 5 years ago. 16.0 grains of Alliant 2400 and WLR primers combined into R-P brass (neck-sized/fire-formed) enables a long service life for brass and a gentle usage pattern in the 1918 BSA platform I enjoy so much.
  3. NVcurmudgeon
    The widely recommended load of 16.0 gr. Alliant 2400 @1460 fps will shoot into 2.5" @100yd. with Lyman 314299, using neck sized R-P cases and Winchester Magnum or standard primers.

    For a very low recoil load Lyman 311413 and 8.0 gr. Alliant Green Dot (1170 fps) or 9.0 Green Dot (1270 fps) My No. 4 rifle shoots center @100 yd. (ladder sight set on 800 yd.)
  4. Mr_yeti
    I shoot 185 gr RN GC (lee mold) as cast at .313 12.4gr unique, CCI 200 primer and group at 1.5" or less. P14 rifle and unissued 1950 longbranch. I can help with any q's you may have. No chrono for velocity testing (my friend shot it)
  5. Daverson
    so i have been reloading my brits with 7.64x54r there 180gr due to ammo prices in canada 303 =$1.30+ where svt 40 .30cents for old corrosive primed stuff but have ran outa surplus and now with a ton of empty x54r 303 cases now i need to make a boolit that good for both so bought a 185gr mould and equipment and35 lbs of mono type and 100 lbs of pure lead im thinking mix 1\3 mono to lead and water quench them or hardness and liquid alloy and gas cap.....sould be good anyone plz help i they have any insight .....just ordered 1000 sks projectiles to feed my habit tell then
Results 1 to 5 of 5
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check