View Full Version : 45 gap die set
ELFEGO BACA
12-03-2010, 09:10 PM
I have a 45 GAP pistol on order.
Will my 45ACP die set work with the 45 GAP?
My only thought is that the seating die may be too long.
elfego:violin:
dudel
12-04-2010, 04:42 AM
ACP die set works just fine. I used my Hornady ACP die set until I saw the Lee set on sale at Midway. I picked up a set for a GAP dedicated toolhead. Works fine.
jcrntx
12-04-2010, 09:15 AM
My Lee set works for both...
357 Voodoo
12-05-2010, 12:24 PM
I use an RCBS set and it works like a champ.
ELFEGO BACA
12-06-2010, 03:29 AM
Thanks for the advice.
elfego
bobthenailer
12-06-2010, 01:31 PM
perhaps the only issue may be in the crimp die ? it may or may not put the correct crimp on the mouth of the case??????
dudel
12-11-2010, 04:59 AM
perhaps the only issue may be in the crimp die ? it may or may not put the correct crimp on the mouth of the case??????
That can be a problem if the die does not have enough thread. The Lee crimper was down to the last few threads on the 550b toolhead. The Hornady had a longer thread lenght on the die. Both work fine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.