pearson1662
12-01-2010, 12:32 PM
I wanted to give a public "Thank you!" to "fourarmed" for a suggestion he made on this forum over four years ago to another caster to use a vise to reduce the protrusion of the alignment pins. I had been attempting to seat the pins deeper using a brass rod and hammer and was getting nowhere, so I did a search for "alignment pins" and his was the last post in the thread. I had never seen it recommended before.
http://castboolits.gunloads.com/show...alignment+pins
It worked like a charm.
You never know when you post when or who will be enlightnened by your experience.
Thanks again, fourarmed!
Jay
http://castboolits.gunloads.com/show...alignment+pins
It worked like a charm.
You never know when you post when or who will be enlightnened by your experience.
Thanks again, fourarmed!
Jay