View Full Version : 444 brass thickness
30hrrtt
11-28-2010, 07:14 PM
I need the case wall thickness of a 444 cartridge at the neck area. Somebody have one handy that can measure it?
Thanks
Firebricker
11-28-2010, 07:52 PM
I got .009 measured with a dial caliper. FB
S.R.Custom
11-29-2010, 11:13 AM
I get .0105" by measuring a loaded Remington factory round.
I've got some new Hornady brass that seems a bit thicker, but it hasn't been stretched over a bullet yet.
Guesser
11-29-2010, 03:18 PM
I just measured a virgin R-P case, using a digital caliper and got .012 at a depth of .25"
wistlepig1
11-29-2010, 10:26 PM
I just measured a virgin R-P case, using a digital caliper and got .012 at a depth of .25"
Used cases, R/P, .0115 with digital calipers. FYI
woody1
11-29-2010, 11:16 PM
From SAAMI cartridge drawing - .012"
30hrrtt
11-30-2010, 09:13 PM
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.