modified lee case trimmer [Archive]

View Full Version : modified lee case trimmer

jbunny

11-23-2010, 03:58 PM

i was haveing trouble with the 44 mag brass not syaing put in my lee case trimmer.
i bored out a 3/4 nut and glued the lee shell holder in with 680 locktite. i then put a
1/2 wide strip of stick on sandpaper on the drum. no problems geting the brass to
stay in place now.
http://i138.photobucket.com/albums/q273/MOUICH/LEECASETRIMMER.jpg

markinalpine

11-23-2010, 04:05 PM

#1 Suggestion

Mark :Fire:

onondaga

11-23-2010, 07:11 PM

If you get tired of that ------ the accessory Lee 3 jaw chuck is wonderful with the Zip Trim.

jbunny

11-23-2010, 08:27 PM

thanks for reminding me of that thing. i found it awkward to use but nowu gave me an idea and it works like a hot damm. i brought that zip trim in from the shop. to cold out there. i bolted it to a scrap peice of plate and i used a powerful welding magnet
on my inthe house loading bench. i just turned the zip trim shaft so it,s pointing up.
gravity became my third hand.
http://i138.photobucket.com/albums/q273/MOUICH/leeziptrim.jpg