I busted a screw

[LongPoint]

=====

[old turtle]

Google "gun parts" and go to Numrich gun parts. Good chance they have the part. Prices are not to bad. I have had good service from them.

[gnoahhh]

I have a s*itload of small screws in fine and extra fine thread. If you can figure out the diameter and pitch I may be able to assist you.

[gnoahhh]

Longpoint,

I have a box of about a thousand (!) 8-36x3/8 flat heads. That's all I have in the way of 8-36. They are zinc plated and the heads look overly large. The plating can be scoured off and the heads turned to size in a drill with a file to reduce the size, then cold blue touch-up. If you want to have a go with them I'll put a few in an envelope and send them to you. PM me soon, as I'm leaving for a loooong weekend for T'giving/hunting tomorrow morning.

P.S. The box they're in refers to radio parts. Maybe that's a size common to old electronics, as a hint to chasing down other ones.

[Trifocals]

LongPoint: Google Jack First Gunshop (Rapid City, SD). There is a very good chance they will have what you need. LOL