seanhagerty
11-14-2010, 06:04 PM
I had to share.
http://www.fotolode.com/images/sabersix315/p1020192.jpg
These are my first boolits!!
I smelt in a dutch oven and make ingots that get stored until ready to mold. Then I go at it.
These were made from ingots that are range scrap, roofing lead and ww's with a foot of plumbers solder thrown in a ten pound production pot. I used a Lee TL-452-200 mold, that I got info on how to condition off this board.
I already got them resized to 0.452 (they came out at 0.454) and lubed and awaiting loading.
Thanks for all the help.
http://www.fotolode.com/images/sabersix315/p1020192.jpg
These are my first boolits!!
I smelt in a dutch oven and make ingots that get stored until ready to mold. Then I go at it.
These were made from ingots that are range scrap, roofing lead and ww's with a foot of plumbers solder thrown in a ten pound production pot. I used a Lee TL-452-200 mold, that I got info on how to condition off this board.
I already got them resized to 0.452 (they came out at 0.454) and lubed and awaiting loading.
Thanks for all the help.