Rebore To 41Mag

[Good Cheer]

Anybody got suggestions on a single shot to rebore to 41 mag?

[badgeredd]

My first thought would be to get a MGM barrel for a Contender or Encore.
A larger Martini action would be pretty cool too. Are you thinking pistol or rifle? I started the thoughts along the idea of a rifle.

Edd

[Dark Helmet]

Handi Rifles 22 hornet,223,357

[rockrat]

Handi 223 barrels would be your best bet. Usually cheaper than most. A new MGM barrel would set you back about the same $$$ too.

[Good Cheer]

Rifle for sure. Longer the barrel the better.

[leadman]

if you are going to do a rifle why not go to 414 supermag? brass is a little more but a big increase in power.

[missionary5155]

Good morning
+1 on that 414 SM... you can figure on a good 300 + fps increase with a 265 grainer GC boolit over the 41 mag.
But then if you really want a 41 rebore that will get things going contact Jesse Reboring. He has a 41 Jes that is built on the 444 Marlin. Has the reamer and everything so production will not eat you alive.

[Good Cheer]

The .223 NEF barrels are 1/2" at the muzzle?

[CENTEX BILL]

Good Cheer:

Not to steal your thread but unless you are dead set on a 41 caliber this may be a economical alternative. In my internet cruising, I saw where Ellett Brother wholesaler had an exclusive run of H&R handirifes. A combo 35 Remington and 444 Marlin barrels in a camo stock for a little over $300.

You can have your dealer call them about the combo package. There number is
Ellett Brothers
267 Columbia Ave, Chapin, SC 29036 » Map (803) 345-3751

I will probably get one of these since I have a lot of 35 cal rifle and pistol molds as well as 44 pistol molds.

If this is of no interest please disregard.

Centex Bill

[canyon-ghost]

http://i758.photobucket.com/albums/xx228/3rdshooter/contenders/41RemingtonMagnumHandcannon001.jpg http://i758.photobucket.com/albums/xx228/3rdshooter/contenders/142grainsof2400lightloadsin41.jpg

Ruger still makes them, so does TC Contender, you surely can't dislike the TC!

[Good Cheer]

Perhaps a 38-55 or a 30-30 work.

[leadman]

30-30 is an excellent cast bullet shooter. One can load from very mild to full factory velocity with cast and usually as well if not better accuracy as jacketed.