Dumb Question /Model 94

[blaser.306]

I have recently received a "new" post 64 model 94 and on first firing it is shooting 6" to the right @ 100 yds . Do I drift the front or rear sight on this for windage adjustment ? ( It's been a long time since iv'e dealt with iron sights ) Thanks in advance for humouring me !

[runfiverun]

either:
the rear goes in the direction you want the boolit to go and the front is the opposite.
sometimes you want to move both a bit to keep things on top of the bbl.

[oneokie]

What he said. Will add that if you move the front sight, use a sight pusher.

[Ramslammer]

G'Day Blaser.306
Make sure you follow oneokie's advice because the ramp is only just held on with a few threads. Also there is no such thing as a dumb question just stupid answers!
Juddy

[blaser.306]

Thanks for the replies , I got it cased now ! Just when I first tried to drift the rear sight it seemed like I was going to have to use a sledgehammer to get it to move . But after taking a deep breath and walking away from it for a few minute it all came togrther . Now to get out to the range and do the "fine " tuning !!!