Request for .30 caliber boolit info

[Marlin Junky]

I need a mold that'll cast a boolit with a nose diameter of .302" to .303" and still be able to size down to .310" on the bands without closing up the lube grooves. Are there any .30/.31 caliber molds out there that fit this description?

Thanks,
MJ

[runfiverun]

an undersized 314299 should be right close. mine [regular]pours at 304 on the nose and 313 on the body with ww's.
there's always the lapping out of say an rcbs silhouette at 165 it's very short bodied.
and the one i have hits 301 and 310 with ww's and 2% tin.
the rcbs 150-fn gc i have, hits the same dimensions with the same alloy.
but it's longer bodied and shorter nosed.
it's also the one that our savage 0-6 likes best, even though the measurements say 165 silhouette.
if your throat is big enough a loverign design might be a good bet too.
good luck