H&R handi rifle

[bigfoot]

does anybody have trouble with the ejector not popping the brass out even enough to get a hold of it with your fingers, its a 223 calib. factory ammo seems to do ok, break it open and it flies out, when i have full length sized brass seems a little better but some still stick, im loading them on the load side of what the speer book says. any ideas
thanks

[Matt3357]

Check out the forums at http://www.go2gbo.com/forums/index.php

These guys on the H&R Centerfire rifle page can help you out. It seems as though there is a simple fix for it, but I have not had that issue as most of my H&R's are extractors.

Good luck,
Matt

[NickSS]

I have had it happen on my 223 Handy rifle occationally. It happens when I have a case that is tight going in and is up there in pressure. Usually opening and closing the action once or twice gets it to pop out.

[twotoescharlie]

polish the chamber

TC

[bigfoot]

thanks guys for the help!!!!
bigfoot