This Lee 6 cavity 358/158 grain mold ain't half bad.

[catboat]

http://cgi.ebay.com/Lee-Bullet-Mold-357-38-/300477170506?pt=LH_DefaultDomain_0&hash=item45f5d5c34a

Lee bullet mold 357/38
Diameter .358 SWC
Weight 158 gr.
6 cavity model # c358-158-swc
Left side of mold is missing but comes in box handles also missing but can be used for good working parts

Someone is selling HALF a Lee 6 cavity 358/158 grain mold. Luckily it includes the sprue cutter, so THAT step won't be an issue during casting with this mold.

Maybe with some judicious hand-landle pouring, and creative sizing, you can get this mold to produce some bullets.

"Good for working parts" is code for "Here's a mounted sprue cutter." :-)

This mold ain't half bad.

[hammerhead357]

Wow some people will try to peddle anything.....I wouldn't have even bothered with listing this one....Wes

[RobS]

yep, cost as much to list it on ebay as to what it may??? possibly bring(no much more than 99 cents I assume). Then the buyer has to look at the cost of shipping at $6.30; it would be better to buy direct from Lee precision for the parts needed.

[462]

"Wow some people will try to peddle anything....."

...some people are willing to buy most anything. I'm going to watch this one.

[Hardcast416taylor]

I`m told that this is a real bullet mold, that makes bullets to shoot at your "half-a**ed relatives"!Robert:kidding:

[jdgabbard]

Wow... And I thought I'd gotten a good deal before! This is a STEAL! LOL

[Ole]

I'm sure he'll be selling the matching half next week. :mrgreen:

[Echo]

This mold ain't half bad.

Yeah, but it's only half good...

[AZ-Stew]

It also says: "Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended."

False advertising??

No, you guys have it all wrong. You cast from the side, use a knife to cut off the overrun, then use JB Weld to glue the halves together to make three good boolits per cast.

Regards,

Stew

[462]

Let's hope the seller isn't aware of loob grooves.

[rhead]

"Your Honor the intended use of this article is to be held against the other side of the set with handles while molten lead is poured in through the top."

Looks like they could preform their intended function get the rest of the set ans see if they work.

Probably someone made a bet that some fool would buy it.

[Hurricane]

I have been looking for some half boolits for a long time to go with my half barrel.

[imashooter2]

$11.35 delivered for a used sprue plate, bolt and $.05 of scrap aluminum. Such a deal!