45 2.1 boolits

[curdog]

45 2.1 stopped by the house the other day and handed me some boolits.
He said try these and see how you like them. 250 gr hollowpoints, out of a BRP mold and i believe it is one of 45 2.1 designs. I loaded them with 10 grs of unique and a nice crimp, 45 colt.
Out of my super redhawk and a 2x leopold with a rest, I shot a 3 shot group under 2 inches at 50 yards , I am very happy and I am not a great pistol shot. I have one of these molds ordered and plan on shootin some deer with these.
I think they will work . Thanks to 45 2.1

[MtGun44]

Pix of the boolit, please!

4.5 2.1 is a good man - we had lunch a few years ago and he helped me a few times
with good tips.

Bill

[BABore]

Based on the weight, it's likely the 453640 as listed here;

http://www.castboolits.gunloads.com/showthread.php?t=66230

[GLL]

This one ?

Jerry

BRP 453640 PB-HP
http://www.fototime.com/60E3BF8EF18DE5D/standard.jpg

[curdog]

I think that is correct 453640.
Big ol honkin hollowpoint.
I would be happy to send you a pic by text as I dont have a digital camera.
pm me a number and I will send you one, if you want.

[curdog]

GLL has it. thank you.

[BABore]

Curdog,

You mentioned you had one of these molds on order. I'm hoping you just sent it out, cause I have nothing in the to-do bin for this design.

[curdog]

BABore,
I will give you a call monday to make sure I ordered the right one. I mailed it about 10 days ago. Thanks.

[MtGun44]

Nice looking boolit. My MP 452-200 penta HP is my most accurate .45 ACP boolit now. It
beat out my old 452460 at 50 yds.

Miha REALLY makes a great mold. It sounds like Bruce is doing a fine job, too.

Bill

[45 2.1]

BABore,
I will give you a call monday to make sure I ordered the right one. I mailed it about 10 days ago. Thanks.

Bruce-
The 453640 as shown above is the correct design. I think he wants the big hollow point pin like mine.

[BABore]

I dug around this morning and found his order stuck between a couple of others. What size is your HP pin, 0.219 or 0.250 dia?

I just casted up a couple hundred of these boolits on Sat. IIRC, my 4C HP mold has 0.219 pins.


Bruce-
The 453640 as shown above is the correct design. I think he wants the big hollow point pin like mine.

[45 2.1]

I dug around this morning and found his order stuck between a couple of others. What size is your HP pin, 0.219 or 0.250 dia?

I just casted up a couple hundred of these boolits on Sat. IIRC, my 4C HP mold has 0.219 pins.

Those were cast out of my 4C HP........ The SCHP has a bigger pin in it, so probably 0.219" pin size for the samples he has. Ask him which he wants as he wants to use it in the ACP also besides the Colt.