Ickisrulz
10-06-2010, 03:48 PM
I picked up a never used Rock Chucker (made in 1974) which came with .30 carbine dies on an auction site. I just like the looks of the older green paint so I went to the used market.
I'm having a bit of trouble mounting it on my bench as the linkage is hitting the frame of the bench. I ordered a 6x6" half inch steel plate that will allow me to mount the press further out. Should work well.
I'm having a bit of trouble mounting it on my bench as the linkage is hitting the frame of the bench. I ordered a 6x6" half inch steel plate that will allow me to mount the press further out. Should work well.