Need to Borrow a Tap

[Hickory]

I need to borrow a 7/8x14 tap to chase the threads on my loading press.
Has anyone got one to loan? PM me if you do.

[RayinNH]

PM sent...Ray

[Hickory]

PM your way

[Bent Ramrod]

I'd advise going carefully here. The size relationship of a standard tap and die is quite a bit looser, typically, than the fit of a die in a die station of a reloading press. You might wind up with a rattly, nut-and-bolt fit when what you wanted was the smooth but tight "running fit" which is more characteristic of a loading tool and its dies.

[nicholst55]

I'd look for either an internal thread chaser or a thread restoring file with a 14 TPI end.

[1hole]

A standard 7/8 x 14 tap worked fine to clean and smooth the threads in my presses.