View Full Version : another contender question
bigfoot
09-23-2010, 08:24 PM
can you free float a contender barrel in the forend like you can a rifle? would it make a diff. in a contender.
thanks
There is a product called a "forend hanger bar". It is supposed to do what you are asking about. I am not endorsing the linked site but am providing it for information only. A Google search for contender forend hanger or contender barrel hanger will provide some info.
http://www.strattoncustom.com/pages-main/category-7/forend-hanger-bars.html
From what I see it is a fairly simple process and one that can be accomplished at home if you have a little bit of skill.
Robert
bigfoot
09-26-2010, 06:55 PM
thanks no1
No problem. Let us know how it works for you and if you do it yourself a write up with pics would be nice!
R.
BerdanIII
09-27-2010, 12:59 PM
You could just drop one or two washers into the fore end lug hole; the fore end screw has enough length to handle it. I noticed some improvement in accuracy in mine.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.