robertbank
09-13-2010, 08:29 PM
Not many, read almost none of the factory loadings for this cartridge make sufficient power factor for IDPA SSR Division ie 125.
Here is a load that does. Burns very clean and runs at 132 PF.
Primers CCI
OAL 1.47"
Clays 3.5 gr
Brass - Winchester
Gun Ruger GP 100 4.2"
SD 9
RCBS 160 gr RN (The bevel base was removed from their 158 gr RN)
Take Care
Bob
Here is a load that does. Burns very clean and runs at 132 PF.
Primers CCI
OAL 1.47"
Clays 3.5 gr
Brass - Winchester
Gun Ruger GP 100 4.2"
SD 9
RCBS 160 gr RN (The bevel base was removed from their 158 gr RN)
Take Care
Bob