DanM
09-13-2010, 10:26 AM
Here is a cerrosafe cast of the chamber of my newly acquired AG42B. It is much tighter than my 1917M96. A cast of the muzzle showed a groove dia. of .2655" measured with a 0-1" mic.
http://i108.photobucket.com/albums/n24/DanM2000/AG42B/AG42BCHAMBER.jpg
My .268" boolits for the M96 might make it about half way into the throat. I think I need a smaller sizer. Will likely start with a.266 sizer and polish it out as needed.
I see that my arrows don't line up right. Neck and throat numbers are right, but obviously the throat arrows should point in front of the neck.
http://i108.photobucket.com/albums/n24/DanM2000/AG42B/AG42BCHAMBER.jpg
My .268" boolits for the M96 might make it about half way into the throat. I think I need a smaller sizer. Will likely start with a.266 sizer and polish it out as needed.
I see that my arrows don't line up right. Neck and throat numbers are right, but obviously the throat arrows should point in front of the neck.