Looking for an Oversize 44 Bullet

[KCSO]

I picked up an EMF 44 Mag carbine and the bore is a little overlarge. I am loking for a mould to cast a 433 or so bullet. I thought there was some talk of one here a while back.

[HammerMTB]

I'd slug the bbl to be certain of what you need, first.
But if you do need .433, just beagle 'em up and try some. If you get the desired result, you can hone out if you want. I have done several undersize molds now and it is fairly easy.

[cabezaverde]

Sent you a PM.

[45 2.1]

I picked up an EMF 44 Mag carbine and the bore is a little overlarge. I am loking for a mould to cast a 433 or so bullet. I thought there was some talk of one here a while back.


http://castboolits.gunloads.com/showthread.php?t=89489

Just what your looking for. The HP'd version is very good.

[longbow]

Or this one:

http://castboolits.gunloads.com/showthread.php?t=58706

Can be had in 0.432" or 0.434". Either or both would be good choices. If I had the toy money I would like both anyway.

[Three-Fifty-Seven]

Send Miha a pm, he should still have some if you hurry . . . 434640 . . . I wouldn't bother with the extra hex pin . . .

http://castboolits.gunloads.com/showthread.php?t=84905

[nicholst55]

Take a look at this thread (http://castboolits.gunloads.com/showthread.php?t=92619); I have a similar problem.

[45 2.1]

Or this one:

http://castboolits.gunloads.com/showthread.php?t=58706

Can be had in 0.432" or 0.434". Either or both would be good choices. If I had the toy money I would like both anyway.

Same boolit... only BRP got it done first.