View Full Version : Need source for a "stop ring bullet"
buckstix
09-03-2010, 11:31 AM
DOES ANYONE HAVE A SOURCE FOR STOP RING BULLETS - OR A MOLD FOR A STOP-RING BULLET. I'm wanting to shoot my Mauser wehrmannsgewehr.
elk hunter
09-03-2010, 02:32 PM
It would help if I/we knew what a "stop ring bullet" was.
Photo/drawing?
Artful
09-03-2010, 02:58 PM
NEI used to make molds for stop ring bullets for
http://www.neihandtools.com/index.html
http://i154.photobucket.com/albums/s277/westerner_photo/505.jpg
designed for seating into the rifling then inserting case check out
American Single Shot Rifle Association or Schuetzen shooting
2Tite
09-03-2010, 05:23 PM
The cheap way out would be to send Eric Holder a commercial mold and have him take one of the middle bands out to the diameter that you specify. He charges a flat rate for enlarging a band.
mrbill2
09-03-2010, 09:02 PM
Well I'll be. Learn something new today.
Bent Ramrod
09-03-2010, 11:03 PM
I have seen a Paul Jones .32 caliber stop ring mould. You might check with him and see if he still offers them.
runfiverun
09-04-2010, 01:42 AM
i'd go with any other than nei anymore.
i'd go with any other than nei anymore.
+1 on this statement.
buckstix
09-04-2010, 07:29 AM
I agree, I won't be buying any NEI products. I sent emails that were not answered, and when I called I got a lot of meaningless double-talk.
I did find that Buffalo Arms had both Stop-Ring Bullets and bullet molds, in stock for the Wehrmannsgewehr.
damron g
09-05-2010, 02:19 PM
Have Erik @ hp mold service open up a band n a standard bullet for you on his CNC mill.His work is unreal and the turnaround time usually less than a week.
keep us posted on the results.i had a 308282 Ideal Armory Mold "stop ring design" that didn't do very well for me but maybe it was the rifles throating.
erik@hollowpointmold.com
George
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.