What kind of mold do I have?

[Jeff Davis]

I need help identifying a 4 cavity Saeco mold in 358 cal. It drops a PB SWC around 160 grs or so.

The only model number I can find is on the sprue plate and it says:
Saeco Custom Precision NO. 050

There is one grease groove on the boolit.

The handles have Scovill Made in USA EE on the brass caps of the handles.

Thank you for your information

jeff

[leadman]

Sounds like the same boolit I have in an old Saeco 2 cavity mold. Kinda a copy of a Keith design.
Excellent shooting boolit by the way.

Do you have pictures?

[Jeff Davis]

I am going to post some of the mold and a boolit or two in a few.

[Jeff Davis]

Here are some boolits

[Jeff Davis]

and a not so hot shot of the mold

[101VooDoo]

Looks like a Saeco 382?

Mine average 159.7 with ww & 2% tin.

Jim

[justingrosche]

Thats what I think to. a Keith Boolit design similar to the Lyman 358429

[cbrick]

SAECO #382 on left is a 150 gr PB SWC. Casts WW + 2% tin @ 149 gr.
On the right is SAECO #388, a 160 gr SWC, mine as shown here is a BB but a trip Erik Ohlen changed it to PB. It casts WW +2% tin @ 161 gr.

Rick